Supercritical fluid extraction for liquid chromatographic determination of carotenoids in Spirulina Pacifica algae: a chemometric approach

An experimental design procedure was used to investigate the effects of some operating parameters on the supercritical fluid extraction of carotenoids beta-carotene, beta-cryptoxanthin and zeaxanthin from Spirulina Pacifica algae, a carotenoid-rich dietary product. Variables tested were temperature and pressure of the supercritical fluid, dynamic extraction time and percentage of ethanol added as the modifier. Each variable was tested at three levels; 31 experiments were performed in random order. Analyses of the extracts were performed by high-performance liquid chromatography with UV-Vis photodiode array detection. Analytical responses (chromatographic peak areas) were processed by using a stepwise multiple regression analysis, in order to find polynomial functions describing the relationships between variables and responses. For all the analytes the experimental conditions providing the highest extraction yield inside the experimental domain considered were found. Supercritical fluid extraction results obtained in these conditions were compared with those obtained by performing solvent extraction in order to evaluate the effectiveness of the supercritical fluid extraction procedure.     

Stereoelectronic control of exo/endo rate ratios in the solvolysis of 2-norbornyl p-toluenesulfonates

The variable exo/endo rate ratios observed in the solvolysis of 6-exo-substituted exo- and endo-2-norbornyl p-toluenesulfonates are due to differential transmission of polar effects in the transition state for ionization.     

Stereochemie von Metallocenen, 40. Mitt.

Starting from optically active methylferrocene-- and--carboxylic acids (1 a and1 b) of known absolute configuration and enantiomeric purity about 15 chiral ferrocenes (of each isomeric series— and ) were obtained by suitable ligand transformations. Thereby (almost) all possible chiral combinations of the ligands CH₃, COOH (COO^–), COOCH₃, CN and NH₂ (NH₃ ⁺) were accessible which are necessary for a potential test of approximations of chirality functions for compounds with basic symmetry C_5v. The chiroptical properties of these disubstituted ferrocenes are recorded.Preliminary tests using a shortened Ansatz revealed large discrepancies between calculated () and found [M]_D-values. Possible reasons for this failure are discussed.

---

---

61. Mitt. über Ferrocenderivate

---

39. Mitt.:A. Meyer, H. Neudeck undK. Schlögl, Chem. Ber.110, 1403 (1977).

---

60. Mitt.:V. Rapi, K. Schlögl undB. Steinitz, J. Organometal. Chem.94, 87 (1975).     

Improved separation of palladium species in biological matrices by using a combination of gel permeation chromatography and isotachophoresis

The binding of palladium to high-molecular-mass compounds in palladium-treated lettuce is investigated as an example for a biological matrix. The total palladium concentration in lettuce leaves is 10.3 ng/g wet weight. After homogenization, high-molecular-mass compounds (> 10 kDa) are isolated by ultrafiltration. For separation of these palladium species a combination of preparative gel permeation chromatography (GPC) and preparative isotachophoresis (ITP) is used. Palladium is determined in separated fractions by using a highly sensitive total reflection X-ray fluorescence (TXRF) method after preconcentration. After GPC separation, four main fractions of palladium species are collected, each containing palladium in ng quantities (3-10 ng). Two of these fractions are further separated by ITP, yielding at least three main peaks per GPC fraction, each containing palladium in the range of 0.3-3 ng. These palladium containing peaks are characterized by high-performance size exclusion chromatography (HPSEC) and capillary isotachophoresis (cITP) in parallel. HPSEC enables the estimation of the molecular mass of six main palladium peaks, covering a molecular mass range of 69-200 kDa. It is also shown that the estimation of molecular mass after separation is more reliable than the respective estimation directly in the first GPC run. However, cITP reveals that each of the separated peaks is still a mixture of at least five different compounds.     

Identification of a chemical indicator of the rupture of 1,4-β-glycosidic bonds of cellulose in an oil-impregnated insulating paper system

In this study, headspace gas chromatography/mass spectrometry has been used to assess the volatile by-products generated by the ageing of oil-impregnated paper insulation of power transformers. Sealed-glass ampoules were used to age under oxidative conditions 0.5-g specimens of insulating paper in 9 mL of inhibited mineral oil in a temperature range of 60–120 °C and moisture of 0.5, 1 and 2% (w/w). A linear relationship between one of the oil-soluble degradation by-products, i.e. methanol, and the number of ruptured 1,4-β-glycosidic bonds of cellulose, regardless of the type of paper (ordinary Kraft or thermally-upgraded (TU) Kraft paper), was established for the first time in this field. Ageing at 130 °C of model compounds of the Kraft paper constituents (α-cellulose, hemicellulose and lignin) and two cellulosic breakdown by-products (D-(+)-glucose and 1,6-anhydro-β-d-glucopyranose) confirmed that the α-cellulose degradation was mostly responsible for the presence of this molecule in the system. Furthermore, additional 130 °C-tests with six different papers and pressboard samples under a tight control of initial moisture indicated that at least one molecule of methanol is formed for each rupture of 1,4-β-glucosidic bond of the molecular chains. Stability tests showed that the ageing indicator is stable under the oxygen and temperature conditions of open-breathing transformers. The presence of methanol was detected in 94% of oil samples collected from over than 900 in-service pieces of equipment, confirming the potential for this application. Lastly, the tests have shown that oil-oxidation by-products and TU-nitrogenous agents modify the methanol partitioning coefficients in the paper/oil/air system, which makes their study essential over a range of field conditions encountered by power transformers. Results are presented and discussed in comparison with 2-furfuraldehyde, which is the current reference in the domain.     

Thermal conductivity and specific heat of amorphous Zr0.67Ni0.33 after structural relaxation

Low-temperature measurements of the thermal conductivity (0.3KT5K) and of the specific heatC (0.07KT3.5K) of splat-cooled amorphous superconducting Zr_0.67Ni_0.33(T _c 2.7K) after different annealing stages are reported. increases progressively (up to 55%) after annealing. An analysis of with the help of normal-state measurements belowT _c in an overcritical field shows that the phonon-electron scattering remains unaltered after annealing. Hence the increase in must be entirely attributed to structure-induced (intrinsic) scattering, i.e. by two-level tunneling states (TLS) at low temperatures (T1K). The specific heat shows a small decrease aboveT _c (by 8%) which is attributed to a small diminution of the electronic density of states at the Fermi level and to a small increase in the Debye temperature. ForTT _c where TLS dominate, the specific heatC decreases less upon annealing than expected from the increase of in the standard tunneling model. This points to a change in the TLS relaxation time spectrum upon annealing, as observed previously for Zr _x Cu_1–x glasses.